Washing machine motor Water inlet valve
Posted: Mon Feb 17, 2025 4:11 am
Pay attention to the blinking of the lock indicator, if it blinks as before, that is, shows that the loading hatch is open, then there is only one conclusion, either repair or change the lock. In the event that the blinking is the same as when the hatch is closed, then go to the next point and check everything according to the list.
The easiest way to check this part is to apply 220 volts to it, if water is poured in, the valve is working, if it is not poured in, then it needs to be replaced.
This applies more to modern washing machines, since old washing machines have asynchronous motors, and the control module is of the selector type. It is necessary to check the brushes, it happens that they wear out canada telegram data and as a result, when the control module carries out the initial diagnostics of faults, it sees a break in the circuit on the motor, as a result, the brains will display an error on the control panel or simply will not give a signal to start washing, that is, to fill with water. You also need to check the windings and the anchor of the motor for breakdown and leakage to the housing, how to do this you can find out from the video below.
The heating element does not work - Many people think that because of a faulty heating element, the washing machine simply does not heat the water - this is a big misconception. If the heating element is broken or there is a leak on the body, then the washing machine may not start, including not filling with water. Again, this applies to a greater extent to modern Indesit washing machines, that is, those on which there is an Arcadia module and EVO-2, these control units are very sensitive to breakdowns and leaks.
The easiest way to check this part is to apply 220 volts to it, if water is poured in, the valve is working, if it is not poured in, then it needs to be replaced.
This applies more to modern washing machines, since old washing machines have asynchronous motors, and the control module is of the selector type. It is necessary to check the brushes, it happens that they wear out canada telegram data and as a result, when the control module carries out the initial diagnostics of faults, it sees a break in the circuit on the motor, as a result, the brains will display an error on the control panel or simply will not give a signal to start washing, that is, to fill with water. You also need to check the windings and the anchor of the motor for breakdown and leakage to the housing, how to do this you can find out from the video below.
The heating element does not work - Many people think that because of a faulty heating element, the washing machine simply does not heat the water - this is a big misconception. If the heating element is broken or there is a leak on the body, then the washing machine may not start, including not filling with water. Again, this applies to a greater extent to modern Indesit washing machines, that is, those on which there is an Arcadia module and EVO-2, these control units are very sensitive to breakdowns and leaks.